Hitron MoCA 2.5 Network Adapter (2-Pack) - Requires Connected Coax Network | Up to 1 Gbps Ethernet Over Existing Coax | Ideal for Cable Internet Homes | 2 HTEM4 Adapters
1-pack
$34.99
Skip to product information
⚠️ IMPORTANT: NOT Compatible with Satellite TV Wiring (Dish/DirecTV) - This adapter requires CABLE TV coax wiring where all outlets are interconnected through your home's main splitter. WILL NOT WORK with homes wired exclusively for Satellite TV (Dish Network or DirecTV) as satellite systems use different wiring configurations. Test by connecting a cable box or cable modem to different outlets to confirm connectivity. Not compatible with homes where coax outlets are isolated or on separate runs.
🏠 PERFECT FOR CABLE INTERNET HOMES: Works with cable internet providers (Comcast. Spectrum. Cox. etc.) where coax cables connect to a main splitter. Does NOT work with satellite internet. AT&T fiber. or homes with isolated coax outlets. Transforms connected coax TV outlets into 1 Gbps Ethernet ports.
1 GBPS ETHERNET PORT Maximum - Need Faster Speeds? - Each adapter features a single Gigabit Ethernet port with maximum output speeds of 1 Gbps (1000 Mbps). If you have multi-gig internet (2 Gbps or higher) or need speeds above 1 Gbps. consider our upgraded model (ASIN: B0C47MJT83) with 2.5 Gbps Ethernet ports. This model is ideal for streaming. gaming. and general internet use up to 1 Gbps.
✅ COMPATIBLE WITH ALL CABLE INTERNET: Works alongside your existing cable modem (this is NOT a replacement modem). Converts coax wall outlets to Ethernet connections. High-split cable internet requires additional POE filter at service entry point (sold separately).
High Split DOCSIS Modem Users: POE Filter Required - If you have a high split cable modem (DOCSIS 3.1 or 4.0 with upstream frequencies above 85 MHz). you MUST install a Point of Entry (POE) filter at your main cable entry point to prevent signal interference. Without this filter. you may experience connectivity issues. Standard cable modems do not require this filter.
Before You Buy - Compatibility Checklist: ✓ Confirm your coax outlets are connected through a central splitter ✓ Check if you have a high split modem (contact your ISP if unsure) ✓ Ensure you have active coax wiring in rooms where you need connectivity ✓ Verify 1 Gbps speeds meet your needs (or upgrade to ASIN B0C47MJT83 for 2.5 Gbps)
📋 SMART PURCHASING GUIDE: This 2-pack includes 1 adapter for near your router + 1 for your device location. Each coax outlet needs its own adapter. Count your needed locations first - buy additional single units if you need more than 2 connections.
📞 SETUP SUPPORT INCLUDED: Free technical support available if you experience connectivity issues. Most problems stem from home wiring configuration. not product defects. Our support team can help verify your coax network compatibility and optimize performance.
-
Hitron MoCA 2.5 Network Adapter (2-Pack) - Requires Connected Coax Network | Up to 1 Gbps Ethernet Over Existing Coax | Ideal for Cable Internet Homes | 2 HTEM4 Adapters
$34.99
🏠 PERFECT FOR CABLE INTERNET HOMES: Works with cable internet providers (Comcast. Spectrum. Cox. etc.) where coax cables connect to a main splitter. Does NOT work with satellite internet. AT&T fiber. or homes with isolated coax outlets. Transforms connected coax TV outlets into 1 Gbps Ethernet ports.
1 GBPS ETHERNET PORT Maximum - Need Faster Speeds? - Each adapter features a single Gigabit Ethernet port with maximum output speeds of 1 Gbps (1000 Mbps). If you have multi-gig internet (2 Gbps or higher) or need speeds above 1 Gbps. consider our upgraded model (ASIN: B0C47MJT83) with 2.5 Gbps Ethernet ports. This model is ideal for streaming. gaming. and general internet use up to 1 Gbps.
✅ COMPATIBLE WITH ALL CABLE INTERNET: Works alongside your existing cable modem (this is NOT a replacement modem). Converts coax wall outlets to Ethernet connections. High-split cable internet requires additional POE filter at service entry point (sold separately).
High Split DOCSIS Modem Users: POE Filter Required - If you have a high split cable modem (DOCSIS 3.1 or 4.0 with upstream frequencies above 85 MHz). you MUST install a Point of Entry (POE) filter at your main cable entry point to prevent signal interference. Without this filter. you may experience connectivity issues. Standard cable modems do not require this filter.
Before You Buy - Compatibility Checklist: ✓ Confirm your coax outlets are connected through a central splitter ✓ Check if you have a high split modem (contact your ISP if unsure) ✓ Ensure you have active coax wiring in rooms where you need connectivity ✓ Verify 1 Gbps speeds meet your needs (or upgrade to ASIN B0C47MJT83 for 2.5 Gbps)
📋 SMART PURCHASING GUIDE: This 2-pack includes 1 adapter for near your router + 1 for your device location. Each coax outlet needs its own adapter. Count your needed locations first - buy additional single units if you need more than 2 connections.
📞 SETUP SUPPORT INCLUDED: Free technical support available if you experience connectivity issues. Most problems stem from home wiring configuration. not product defects. Our support team can help verify your coax network compatibility and optimize performance.
-